My first day back after a couple of weeks off and a day of writing a spec for a job I need to do at the end of the week. Since there are changes afoot and people are wanting to know what other people do, rather than just write the spec, I’m writing the manual to the job at the same time.
I don’t mind writing technical manuals, and when I write them, I tend to write them in a training manual style, since the people who are likely to need them won’t be as familiar with the work as I am. Besides, they are better to write like that.
My first passion, when it comes to writing, is science fiction and fantasy, but with 4 kids, it’s nigh impossible to find the time to write. So I take what I can get, and at the moment, that is a technical manual and this blog.
Well, three sling straps have been put through their paces and I’ve come to one conclusion at least; sling straps are so much better than neck straps. If you’re fed up of your camera neck strap, give one of these a go. They do take some getting used to, but once you get the hang of it, they are so much better for carrying and using your camera. After each review I tried each of the straps again, with and without the under-arm straps. My dad came along for a shoot and tried one of them out, so his feedback will feed into the final results. (He’s now a convert too.)
The three contenders
To round up, rather than look at each strap individually again, I thought I’d look at how each strap fared with the qualities I was looking for.
Comfort
All three performed brilliantly as far as comfort goes. I can’t pick one out of the three so they each tie. Simply put, all three straps are far more comfortable than a regular neck strap.
In Use
This is where the post-review feedback comes in. Having tried each of the straps with the Carry Speed arm strap and the Black Rapid BRAD, I can honestly say the handling of each strap is greatly improved without the under-arm straps; more on that later.
The RS-4 didn’t give quite enough slack when bringing the camera up to shooting position and the connector allows the camera to spin around far too much for my liking. The strap was easiest to adjust though.
This was the poorest performer as far as slack in the strap, although it improves greatly without the under arm strap attached. The bumpers are the hardest to adjust as was the strap itself. The flat connecting plate is probably the best connector of the three. It was the hardest to connect, but that was down to the carabiner. My Dad tried out the CS-1 and discovered that the locking screw had unscrewed leaving the latch of the carabiner free and easy. The CS-1 had by far the worst carabiner of the three in use.
This was easy to adjust, and easy to use. The connecting plate is a massive improvement over the Black Rapid one, but not quite as secure are the CS-1 plate, though not by much. The carabiner was identical to the Black Rapid one and the plate hooks on and off easily; by far the smoothest of the three. This was the only strap out of the three to give enough slack when shooting with the camera, yet keep it short enough to let the camera hang just where I wanted it.
Price
If it were not for price, then the Black Rapid and the Quick Strap would be pretty much tied, but it is a big price difference and I’m not sure the extra £30 can be justified by Black Rapid. Don’t get me wrong, it is a great strap and going by looks alone, I would give it the top spot. But that price difference is quite big considering the differences are quite small.
About Those Arm Straps…
After the BRAD arrived, I tried it out on each of the straps and to be honest, it sucked as much as the strap that came with the CS-1. I eventually decided to mod the Carry Speed arm strap, cutting away about two and a half inches of strap and re-stitching it so that the quick release buckle was at the front rather than the middle. This improved it immensely, but although it kept the shoulder pad in place, it restricted the amount of slack on the strap and it proved very difficult to bring the camera up to shooting position on any of the straps, so my advice is not to bother with them. Yes, the shoulder pad will slip and slide all over when you’re shooting, but use the bottom bumper and the pad will sit where it should when the camera sits where it should.
And the winner is…
The Winner
Factor in the price and the fact that it simply does not get in the way of shooting and the Quick Strap| Q Strap comes ahead as a clear winner. My only criticism is that it comes with a single bumper and not two, but it is a minor complaint. (After a little modding (and robbing of a Naneu Pro bag), I managed to get a second bumper on it.) That aside, for the price, you can’t beat it and I heartily recommend it.
Black Rapid are probably the market leader when it comes to camera sling straps. They certainly have the brand reputation, but with that comes a price to match. The RS-4 costs around £50 in the UK, and can be found at Jacobs, Jessops and various online retailers.
The strap comes nicely packaged in a box and has a handy elastic band to wrap around the strap when storing in your camera bag. I found that a nice touch. The RS-4 has a small zip pocket like the Q strap and will fit a couple of memory cards. It comes with two sliding bumpers, a ConnectR-2 carabiner that is very much like the one supplied with the Q strap, and the fastenR-3 connector, a small round connecter that screws firmly into the camera’s tripod socket.
Black Rapid RS-4 strap
The strap is a thick seatbelt type material that sits somewhere between the Q strap and the CS-1. The pad is nicely padded and is made from a rip-stop material that gives it a different look to the other two straps Adjusting the strap is much easier than the other two straps and the bumpers slide up and down the strap smoothly and are also easy to adjust.
The strap is comfy, like the other two and sits nicely on the shoulder. The camera sits nicely on the hip, though I did find that the camera tended to spin round thus proving the point the other manufacturers make about the flat connecting plate allowing the camera to sit more naturally at the hip. It doesn’t sound like a big thing, but it was really irritating.
The RS-4
I did find the strap had an occasional tendency to fight you when bringing the camera into shooting position. Like the CS-1, you need the strap a little longer than your want in order to get the proper amount of slack. It didn’t seem to be a problem on the Q strap though.
The bumpers worked well. The BRAD arm strap hadn’t arrived in time to test it, so I tried Black Rapid’s method of using the bottom bumper to push the strap back into position and it worked fine without being irritating. The top bumper slid down to lock the camera in position, preventing the camera from lolling about when leaning forward.
All in all, the RS-4 is a great strap and I really liked it. They could learn from the competitors connectors, but the strap is great. The only down side is the cost. The quality is great. The design is great, in use it is very good, but is it worth £50? That’s a question to be settled on another day.
WeavingLight 